Now that the CrossFit Open is over, it’s the off-season for most athletes who compete in CrossFit as a sport. And we know that means most of you are thinking – “it’s time to do a strength cycle!”

Many of you are hopping on the internet, checking out online CrossFit programs, reading forums, and scrolling through Instagram posts.

  • Some will try Wendler’s 5/3/1
  • Some will put together a version of a Westside conjugate cycle
  • Some will read an article on Bulgarian weightlifting and start maxing out their squat every day
  • And there’s probably a special individual out there who is going to layer the Smolov cycle on top of a lifting cycle from Catalyst athletics and do the CompTrain conditioning workouts as PM sessions. Good luck to them.

But athletes can often get in trouble when they attempt to use strength programs designed specifically for powerlifting or for hypertrophy with CrossFit programs. They often don’t understand the principles behind the programs, nor do they fully understand what makes athletes successful in the Open and Regionals.

For many athletes, they’re making the right call by focusing on strength in the “off-season.”

The third barbell in Open Workout 17.3 was 225/155 – which just four years ago was a solid max snatch for an athlete at Regionals. Muscle-ups and handstand push-ups have become staples of the Open. And in 2018 we saw new movements weekly!

If you don’t have the buy-in strength to compete at the level you wish to compete at – whether that’s qualifying for Regionals, getting into the top 100 in our region in the Open, or just improving from last year – now is a good time to work on it.

Here are 6 methods you could use to develop raw strength

1. Volume-Based Session

There is a continuous debate in the strength and conditioning world about “volume” vs. “intensity.” The reality is – just like in most complex and emergent things – the answer’s “it depends and no one really knows.”

Let’s just say that a CrossFit athlete must train both volume and intensity throughout the year, but some people seem to respond better to one style of session over the other.

How can you tell which is for you?

  • Do you feel like it takes you a lot of warm-up sets to get to a heavy triple? Do you tend to hit PRs at the end of EMOMs? You’re probably a volume responder.
  • Do you prefer to take big, quick jumps to build to a heavy triple? Do you find yourself feeling crushed for a few days after pushing the intensity on a workout with a lot of volume? You’re probably an intensity responder.

The rules here are made to be broken, but let’s say that a “volume-based session” includes more than 20 repetitions at a working weight over somewhere around 80% of one rep max.

In this example, were dealing with 30 total working reps split into sets of 6.

Front Squat

5x2.2.2; Across; Rest 2 min

*Re-rack between sets of 2

For progression, we can increase the weight across weeks. We can do that by either linearly building in weight weekly while maintaining the same reps and sets, or by decreasing reps, decreasing sets, or increasing rest time to enable heavier weights to be lifted.

2. Intensity-Based Session

If our rule of thumb for a volume-based session was over 20 working reps at greater than 80% of 1RM, our intensity-based sessions usually have far fewer reps than that.

Let’s use a version of a front squat session to illustrate this type of training as well:

Front Squat

Build quickly to a tough triple for today in 10 min

*Start moderate and take big jumps

For a prototypical “intensity responder,” they may be able to build to a tough triple in 5 sets with big jumps. Let’s use an avatar of a male athlete shooting for 365 on his tough triple.

His jumps may look something like this:

45 x5/135 x5/225 x5/275 x3/325 x3/365 x3

To a more volume-biased athlete, that probably looks insane, but this feels totally reasonable to a certain type of athlete.

How do we progress this type of session? On a weekly basis, we can decrease the number of reps – thus increasing the weight lifted. We could start at 5, then go 4, 3, 2, 1 over the next several weeks.

3. Accessory Work

Adding in variations of the main training lifts for slightly higher repetitions has a long track record of success in any strength sport.

One of the best ways to do this is to superset opposing movements (horizontal upper body pushing/horizontal upper body pulling, squatting/hinging, etc.) for sets of 6-15 reps with moderate rest in between sets.

In this example, we have a single-leg squatting-based movement paired with a bilateral hinging-based movement.

A1. Rear-Foot Elevated Split Squats

3x8/leg; 30x1 tempo; Building; Short rest b/w legs; Rest 60s

A2. Clean-Grip RDLs

3x8; 30x1 tempo; Building; Rest 60s

We can progress this just like the other sessions by adding volume, adding weight, or decreasing rest.

In advanced athletes, there’s also value in rotating exercises somewhat regularly. In this case, we may decided to make the following week something like this:

A1. Front Rack Step-Ups to 24″

3x8/leg; 30x1 tempo; Building; Short rest b/w legs; Rest 60s

A2. Safety Bar Good Mornings

3x8; 30x1 tempo; Building; Rest 60s

4. Tempo Protocols

Bodybuilders and powerlifters have been using prescribed tempos for ages in order to increase the time under tension of a lift and train problem areas in the range of motion or in muscle development.

While CrossFit traditionally calls for maximizing power output and intensity during a training session, there is sometimes magic in improving both the eccentric and isometric portions of a lift…

…which can be done through prescribing specific tempos.

Tempo training can get all kinds of complicated, but for a relatively simple example, here are some back squats with a 4 count eccentric (lowering), no pause in the bottom, explosive concentric (raising), and a 1 count pause up top.

If you’re honest on these 4 count tempos, this type of training can be very humbling – particularly for the highly explosive athletes who rely extensively on stretch reflex to get through movements.

Back Squat

5x3; 4x1 tempo; Across; Rest 2-3 min

Progressing a tempo-based session can follow the exact same rules of thumb discussed for the volume- and intensity-based sessions above. Or, you can manipulate the tempo itself, typically moving from slower eccentrics and longer pauses into more explosive work.

5. Specific Positional Work

In addition to tempo training, we can also force pauses at various stages of a lift. This is great for developing body awareness by taking away the ability to speed through transitions or difficult areas. It also forces you to create a large amount of isometric tension.

I have found pausing in certain ranges of motion to be one of the better tools for improving hinging in CrossFit athletes – particularly those who struggle with back issues when doing a lot of deadlifting volume.

The pauses are self-limiting in terms of the amount of weight that they can use. It also creates more awareness surrounding positions and how stability is being created through the range of motion.

In this example session, we’re focusing on the deadlift:

Deadlift w/ 1s pause at mid-shin

4x4; Across; Rest 2 min

*Reset each rep

Progression here can follow the same rules in terms of changing volume, intensity, and rest. But we can also adjust either the time paused or the position of the pause.

In the above example, we may progress this by moving the pause further up the range of motion:

Deadlift w/ 1s pause above-the-knee

4x4; Across; Rest 2 min

*Reset each rep

6. Variations In Main Exercise

Westside Barbell has become famous for constantly varying the exercise they use on their max effort days. By switching bars and ranges of motion, they avoid overtraining specific movement patterns and force learning and adaptation to slightly different patterns.

Now, this variation can go too far and can prevent developing proper skill in certain movements (which is why you don’t see weightlifters changing the type of bar that they snatch on every week).

But – just like almost everything discussed in this article – there is a pendulum that can swing too far in both directions.

Some variations reduce the total amount of load possible to be lifted in a specific pattern. If we take the deadlift, we can change the grip to significantly decrease the amount of load an athlete is pulling:

Double Overhand Deadlift, no hook grip – 2” riser

Build to a tough 5 for today in 10 min

*Reset each rep

**Should be less than a tough set of 5 for a conventional deadlift

Similarly, we can also dramatically increase the load an athlete can lift in a deadlift by shortening the range of motion:

Rack pulls from above-the-knee

Build to a tough 5 for today in 10 min

*Reset each rep

**Should be more than a tough set of 5 for a conventional deadlift

These variations of the main lifts can be used as accessory work, or can be rotated in as focus lifts for either a training session or a cycle.